TP-Link Router Login IP Address: When you bought a new TP-Link WiFi router for your home or office, you may know how to connect the router to PC. But, do you know how to access the internet or setting up a WiFi Password for your wireless network? Maybe your answer might be a Yes or a No. But to access or change the settings of your TP-Link Wireless Router device, you need to enter into the admin page. To enter into the admin page of TP-Link, you need to have the TP-Link Router Login IP Address with login credentials. With the help of TP-Link default login IP address and with default logins, you can complete the setup of your TP-Link Router.
Here in this article, you will know about the TP-Link Router Login IP Address, that is used to access the settings/admin page of the router. Usually, every router needs to obtain two IP addresses to commence its task. One is the IP that comes from DSL Modem or through the direct internet line, i.e., from ISP. The other is the default IP address of the router device. The TP-Link Router Login IP Address is 192.168.1.1. This default IP address may vary from device to device. The another most commonly defined default IP address of TP-Link is 192.168.0.1. Using these IP address of TP-Link, one can access the admin page by providing the necessary credentials.
What is TP-Link Router Login IP Address?
The TP-Link Router IP address or the default IP address is both the same. And that is either 192.168.1.1 or 192.168.0.1. TP-Link assigns these default IP’s for a device to avoid conflicts within the routers of different models. If a device is connected to TP-Link WiFi router, then it will automatically assign a dedicated IP to the device. As you can change the IP address of a WiFi accessing device manually, ranging from 192.168.1.2 to 192.168.1.254 if the default IP is 192.168.1.1. And if the default TP-Link Router IP Address is 192.168.0.1, then you can assign IP’s ranging from 192.168.0.2 to 192.168.0.254.
How to access Login Page of TP-Link Router using IP address?
Unbox the device and connect the TP-Link Router to your PC.
- For better performance, avoid loose connections
- Turn on both the Router and the PC once instantly.
- Open any of the available browsers on your PC.
- Enter default TP-Link Router Login IP Address, i.e., 192.168.1.1 at the address bar.
- Select GO
Now you can see login page of your TP-Link WiFi router with a dialog box asking to provide login credentials, i.e., default logins on your router.
Default TP-Link Router Login IP Address not working?
As there are many reasons for not working of TP-Link IP address, here are some of those issues with a solution add-on to it.
- Check whether your device is appropriately connected to the PC or Laptop. Loose contacts may result in failure of IP address accessibility.
- See whether you are entering the correct default TP-Link Router Login IP Address, i.e., as we discussed before it must be either one of the following IP’s 192.168.1.1 or 192.168.1.254.
- Many people do type 192.168.l.l instead of 192.168.1.1. But just remember, an IP address of TP-Link WiFi router will always be in numerics with Period (.) dividing the numbers.
- One reason must be that your PC might have an Anti-Virus software that stops the Foreign IP’s. Try deactivating the Anti-Virus software or enter the default TP-Link IP address manually in the network settings.
That’s all about it! Just drop a comment if you feel I missed anything. Or shoot me with a question if you have any.